DuraPatcher P3 (ghost truck) – Trinity

DuraPatcher P3 (ghost truck)


All the same features as the trailer patcher but with truck mounted convenience. Especially useful in low clearance residential streets or areas with tight turning radiuses. The 6 yd aggregate hopper keeps operators out working with less refills. The Universal design easily mounts to most truck chassis.


Patch in almost any weather conditions and eliminate labor intensive, poor performing patches with the DuraPatcher 4 step process.


The 3 piece boom design provides the ultimate in support for the operator moving the delivery hose. The boom/slide system easily moves throughout the entire 18 foot working radius allowing for smooth patching anywhere in the work zone.


The specially designed Vent-Flo nozzle properly coats the aggregate with the right amount of emulsion regardless of aggregate size. The mix is applied at an angle to the repair allowing maximum placement and best operator safety. The vent holes diffuse/ slow down the air stream to minimize rock overspray and maximize placement into the repair.


The emulsion tank provides enough product to apply over 10 tons of patch before refilling.The heating blankets allow the patcher to be plugged in to keep emulsion at a “ready-to-go” temperature.




Emulsion Capacity (US gallons)


Aggregate Capacity

6 yards


74HP IT4 Diesel

Heating Method (overnight)

Electric Blanket

Heat Rating (watts)

2 x 1500W

Tank Insulation

R 15


450 CFM at 1500 RPM, 10 PSI



Brake Type


Clean Out

15 gallons

Fuel Capacity

18 gallons


10 channel main frame

Drain Valve

3 in.

Temperature Gauge

5 in.


w/o Truck (l x w x h): 241" x 92" x 76"

Shipping Weight (lbs)