Road Mill RX-700e/ex

Frame

All Roadtec Milling Machines start with an extremely strong frame completely fabricated, welded and assembled by us.  This gives us complete control over the design and quality of the build.  We are the only manufacturer to use A656 Grade 80 steel throughout the frame.  This special grade of steel has twice the strength of the mild steel that is commonly used.  This allows us to build a stronger, lighter frame than anybody else in the industry.

Dust Extraction System

Standard dust extraction system pulls dust from the primary conveyor and ejects the material along the secondary conveyor into the dump truck.

ACE Grade and Slope Automation with Auto-Cut

ACE™ automates the elevation of the machine through a combination of grade and slope sensors. The ACE option includes three user friendly control panels to be placed at the operator station and at the sides of the machine to make the milling operation as simple and convenient as possible.

Dual Water Spray Bars

Roadtec milling machines have two independent spray bars to inject water in the cutter housing.  The front spray bar is primarily for dust suppression, the rear spray bar cools the drum.

Secondary Conveyor Swing

All Roadtec milling machines offer 60 degree conveyor swing, allowing you to easily feed a truck in an adjacent lane or around a tight bend such as in a cul-de-sac.

Three Track or Four Track – It’s Your Choice

Both Three Track and four track machines have benefits, so why be forced into one or the other? Roadtec gives you a choice.

Folding Conveyor

A folding secondary conveyor is available on all Roadtec Milling Machine models to aid in transport and loading.